Clear
For areas where graphics or displays need to remain visible. Confirm clarity and reflections in the final assembly.
Request a quotePVC · ZE SHUN
PVC vinyl materials
Material options for printed graphics and overlays
PVC is available in different rigidities, colours and surface grades for printed markings, decorative overlays and graphics. Specify rigid or flexible PVC and the required clear, matte or textured finish.
Ask about materials and sizes
ZE SHUN overall processing thickness
0.125 — 5 mmMinimum 0.125 mm; maximum 5 mm. This is the overall capability range. Available thickness depends on the material, finish and process.
Surface and light-transmission options
Illustrations explain selection options, not physical samples. Available finishes, optical grades and thicknesses must be confirmed by material grade.
Textured matte
Fine surface texture for a matte appearance and tactile finish. Confirm texture against a sample.
Frosted / hazy
A softer translucent or frosted appearance. Balance haze against display clarity.
Light diffusing
For backlights, lighting and display areas requiring more uniform illumination. Evaluate with the light source, spacing and material grade.
MATERIAL SPECIFICATIONS
Reference sizes by material
Published supplier examples, not ZE SHUN stock or a statement of our full-sheet processing size. Thicknesses and formats cannot be freely combined. Confirm supply, cut sizes and processing specifications with ZE SHUN.
| Material / reference series | Thickness (mm) | Sheet size (mm) | Roll width (mm) |
|---|---|---|---|
| PET / MYLARGrafix · DuraLar polyesterSource ↗ | 0.125 / 0.175 / 0.250 | 508 × 635 / 635 × 1016 / 762 × 1016 | 508 / 1016 / 1270 |
| PVCGrafix · ClearLay rigid PVCSource ↗ | 0.125 / 0.175 / 0.250 / 0.500 | 508 × 635 / 635 × 1016 / 762 × 1016 | 660 / 1321 |
| PCTekra · Marnot Advanced LI PCSource ↗ | ≈ 0.178 / 0.254 / 0.381 / 0.508 / 0.762 | ≈ 1220 × 610 | ≈ 1232 |
| PMMA / ACRYLICPLEXIGLAS · GS / XTSource ↗ | 1.5 / 2 / 3 / 4 / 5 | 3050 × 2050 (XT) / 3050 × 2030 (GS) | — |
Sheet size is length × width. Inch dimensions are converted; ≈ means approximate. PET and PVC gauges use the supplier’s nominal metric values. PMMA 1.5 mm is an XT example; GS examples start at 2 mm. “—” denotes a sheet-based reference.
See the materials in product applications
Discuss printing, openings and outlines against the product drawing. Share the service environment, assembly method and surface requirements to establish the appropriate grade.
